Assessing the effects of thermal bridging at junctions and around openings
Assessing the effects of thermal bridging at junctions and around openings (IP 1/06) was written by T I Ward and published by BRE in March 2006.
This 6-page paper gives guidance on assessing the effects of thermal bridging at junctions and around openings in the external elements of buildings and how to assess their effect on heat loss or heat gain. It enables estimation of these heat transfers for building regulations compliance calculations. It supports the building regulations for the conservation of fuel and power in all three jurisdictions within the UK. The guidance is primarily intended for junction and opening details that are not as recommended in 'Accredited construction details' or MCRMA/EPIC guidance.
It is a revision of IP17/01 which has been withdrawn.
The contents of the paper are:
- Introduction.
- Building Regulations.
- Numerical modelling.
- Limiting the risk of surface condensation or mould growth.
- Assessing thermal performance.
- References.
[edit] Related articles on Designing Buildings Wiki
- Accredited construction details ACDs.
- BRE articles.
- Building Research Establishment.
- Conventions for calculating linear thermal transmittance and temperature factors.
- Emission rates in the building regulations.
- Reducing thermal bridging at junctions when designing and installing solid wall insulation FB 61.
- Thermal bridge.
- Thermal imaging to improve energy efficiency in building design.
- Thermographic survey.
- U-values.
Featured articles and news
The 5 elements of seiri, seiton, seiso, seiketsu and shitsuke.
Shading for housing, a design guide
A look back at embedding a new culture of shading.
The Architectural Technology Awards
The AT Awards 2025 are open for entries!
ECA Blueprint for Electrification
The 'mosaic of interconnected challenges' and how to deliver the UK’s Transition to Clean Power.
Grenfell Tower Principal Contractor Award notice
Tower repair and maintenance contractor announced as demolition contractor.
Passivhaus social homes benefit from heat pump service
Sixteen new homes designed and built to achieve Passivhaus constructed in Dumfries & Galloway.
CABE Publishes Results of 2025 Building Control Survey
Concern over lack of understanding of how roles have changed since the introduction of the BSA 2022.
British Architectural Sculpture 1851-1951
A rich heritage of decorative and figurative sculpture. Book review.
A programme to tackle the lack of diversity.
Independent Building Control review panel
Five members of the newly established, Grenfell Tower Inquiry recommended, panel appointed.
Welsh Recharging Electrical Skills Charter progresses
ECA progressing on the ‘asks’ of the Recharging Electrical Skills Charter at the Senedd in Wales.
A brief history from 1890s to 2020s.
CIOB and CORBON combine forces
To elevate professional standards in Nigeria’s construction industry.
Amendment to the GB Energy Bill welcomed by ECA
Move prevents nationally-owned energy company from investing in solar panels produced by modern slavery.
Gregor Harvie argues that AI is state-sanctioned theft of IP.
Experimental AI housing target help for councils
Experimental AI could help councils meet housing targets by digitising records.
BSRIA Occupant Wellbeing survey BOW
Occupant satisfaction and wellbeing tool inc. physical environment, indoor facilities, functionality and accessibility.